15 tips on How to 100-101 Test Like a Badass [46 to 60]

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 100-101 Exam Dumps (PDF & VCE):
Available on: https://www.certleader.com/100-101-dumps.html


100% Correct of 100-101 free practice questions materials and dumps for Cisco certification for customers, Real Success Guaranteed with Updated 100-101 pdf dumps vce Materials. 100% PASS CCNA Interconnecting Cisco Networking Devices 1 (ICND1) exam Today!

2016 Apr 100-101 Study Guide Questions:

Q46. Which two commands will display the current IP address and basic Layer 1 and 2 status of an interface? (Choose two.) 

A. router#show version 

B. router#show ip interface 

C. router#show protocols 

D. router#show controllers 

E. router#show running-config 

Answer: BC 


Q47. Which option is a valid IPv6 address? 

A. 2001:0000:130F::099a::12a 

B. 2002:7654:A1AD:61:81AF:CCC1 

C. FEC0:ABCD:WXYZ:0067::2A4 

D. 2004:1:25A4:886F::1 

Answer: D 


Q48. Refer to the exhibit. 


The output is from a router in a large enterprise. From the output, determine the role of the router. 

A. A Core router. 

B. The HQ Internet gateway router. 

C. The WAN router at the central site. 

D. Remote stub router at a remote site. 

Answer: D 


Q49. Refer to the exhibit. 


Host A is sending a packet to Host B for the first time. What destination MAC address will Host A use in the ARP request? 

A. 192.168.0.1 

B. 172.16.0.50 

C. 00-17-94-61-18-b0 

D. 00-19-d3-2d-c3-b2 

E. ff-ff-ff-ff-ff-ff 

F. 255.255.255.255 

Answer: E 


Q50. Refer to the exhibit. 


An administrator replaced the 10/100 Mb NIC in a desktop PC with a 1 Gb NIC and now the PC will not connect to the network. The administrator began troubleshooting on the switch. Using the switch output shown, what is the cause of the problem? 

A. Speed is set to 100Mb/s. 

B. Input flow control is off. 

C. Encapsulation is set to ARPA. 

D. The port is administratively down. 

E. The counters have never been cleared. 

Answer: A 


100-101 pdf exam

Up to date 100-101 braindumps:

Q51. What is the default maximum number of equal-cost paths that can be placed into the routing table of a Cisco OSPF router? 

A. 2 

B. 8 

C. 16 

D. unlimited 

Answer: B 


Q52. Which two characteristics describe the access layer of the hierarchical network design model? (Choose two.) 

A. layer 3 support 

B. port security 

C. redundant components 

D. VLANs 

E. PoE 

Answer: BD 


Q53. How does TCP differ from UDP? (Choose two.) 

A. TCP provides best effort delivery. 

B. TCP provides synchronized communication. 

C. TCP segments are essentially datagrams. 

D. TCP provides sequence numbering of packets. 

E. TCP uses broadcast delivery. 

Answer: BD 


Q54. Which two of the following are true regarding the configuration of RouterA? (Choose two.) 

A. At least 5 simultaneous remote connections are possible 

B. Only telnet protocol connections to RouterA are supported 

C. Remote connections to RouterA using telnet will succeed 

D. Console line connections will nevertime out due to inactivity 

E. Since DHCP is not used on Fa0/1 there is not a need to use the NAT protocol 

Answer: AC 


Q55. Refer to the exhibit. 


A person is trying to send a file from a host on Network A of the JAX Company to a server on Network Z of the XYZ Company. The file transfer fails. The host on Network A can communicate with other hosts on Network A. 

Which command, issued from router RTA, would be the most useful for troubleshooting this problem? 

A. show flash: 

B. show history 

C. show version 

D. show interfaces 

E. show controllers serial 

Answer: D 


100-101 exam cram

Real 100-101 software:

Q56. What is the purpose of the switchport command? 

Switch(config-if)# switchport port-security maximum 1 Switch(config-if)# switchport port-security mac-address 0018.DE8B.4BF8 

A. It ensures that only the device with the MAC address 0018.DE8B.4BF8 will be able to connect to the port that is being configured. 

B. It informs the switch that traffic destined for MAC address 0018.DE8B.4BF8 should only be sent to the port that is being configured. 

C. It will act like an access list and the port will filter packets that have a source or destination MAC of 0018.DE8B.4BF8. 

D. The switch will shut down the port of any traffic with source MAC address of 0018.DE8B.4BF8. 

Answer: A 


Q57. Which two statements describe the operation of the CSMA/CD access method? (Choose two.) 

A. In a CSMA/CD collision domain, multiple stations can successfully transmit data simultaneously. 

B. In a CSMA/CD collision domain, stations must wait until the media is not in use before transmitting. 

C. The use of hubs to enlarge the size of collision domains is one way to improve the operation of the CSMA/CD access method. 

D. After a collision, the station that detected the collision has first priority to resend the lost data. 

E. After a collision, all stations run a random backoff algorithm. When the backoff delay period has expired, all stations have equal priority to transmit data. 

F. After a collision, all stations involved run an identical backoff algorithm and then synchronize with each other prior to transmitting data. 

Answer: BE 


Q58. Which two of these statements are true of IPv6 address representation? (Choose two.) 

A. There are four types of IPv6 addresses: unicast, multicast, anycast, and broadcast. 

B. A single interface may be assigned multiple IPv6 addresses of any type. 

C. Every IPv6 interface contains at least one loopback address. 

D. The first 64 bits represent the dynamically created interface ID. 

E. Leading zeros in an IPv6 16 bit hexadecimal field are mandatory. 

Answer: BC 


Q59. Scenario 

Refer to the topology. Your company has decided to connect the main office with three other remote branch offices using point-to-point serial links. 

You are required to troubleshoot and resolve OSPF neighbor adjacency issues between the main office and the routers located in the remote branch offices. 


An OSPF neighbor adjacency is not formed between R3 in the main office and R5 in the Branch2 office. What is causing the problem? 

A. There is an area ID mismatch. 

B. There is a PPP authentication issue; a password mismatch. 

C. There is an OSPF hello and dead interval mismatch. 

D. There is a missing network command in the OSPF process on R5. 

Answer: C 


Q60. Refer to the exhibit. 


The MAC address table is shown in its entirety. The Ethernet frame that is shown arrives at the switch. 

What two operations will the switch perform when it receives this frame? (Choose two.) 

A. The switch will not forward a frame with this destination MAC address. 

B. The MAC address of 0000.00aa.aaaa will be added to the MAC Address Table. 

C. The MAC address of ffff.ffff.ffff will be added to the MAC address table. 

D. The frame will be forwarded out all active switch ports except for port fa0/0. 

E. The frame will be forwarded out fa0/0 and fa0/1 only. 

F. The frame will be forwarded out all the ports on the switch. 

Answer: BD 



see more CCNA Interconnecting Cisco Networking Devices 1 (ICND1)