Key benefits of 642-035 certification

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 642-035 Exam Dumps (PDF & VCE):
Available on: https://www.certleader.com/642-035-dumps.html


Counting on outstanding technology, better services for patrons. Actualtests offer Round-the-clock customer service with regard to Cisco examinee and you may get what you want understand at any time. Your pleasure of our 642-035 is actually our own services objective, the companys joint improvement together with clients is actually our own prolonged quest in a large number. So please dont hesitate to contact us for those who have any questions associated with 642-035 test.

2016 Jul 642-035 certification:

Q21. A customer would like to create an Ethernet traffic monitoring session on a Cisco UCS server to troubleshoot network connectivity. The customer has entered the following commands via CLI: 

UCS-A# scope eth-traffic-mon UCS-A /eth-traffic-mon # scope fabric a UCS-A /eth-traffic-mon/fabric # create eth-mon-session EthMonitor33 UCS-A /eth-traffic-mon/fabric/eth-mon-session* # create dest-interface 2 12 UCS-A /eth-traffic-mon/fabric/eth-mon-session/dest-interface* # set speed 20gbps UCS-A /eth-traffic-mon/fabric/eth-mon-session/dest-interface* # commit-buffer UCS-A /eth-traffic-mon/fabric/eth-mon-session/dest-interface # 

Which outcome will this command sequence produce? 

A. It will create an Ethernet traffic monitoring session to copy and forward traffic to the destination port at slot 2, port 12, will set the admin speed to 20 Gb/s, and will commit the transaction. 

B. It will create an Ethernet traffic monitoring session to copy and forward traffic to the destination port at slot 2, port 33, will set the admin speed to 20 Gb/s, and will commit the transaction. 

C. It will create an Ethernet traffic monitoring session to copy and forward traffic to the destination port at slot 33, port 12, will set the admin speed to 20 Gb/s, and will commit the transaction. 

D. It will create an Ethernet traffic monitoring session to copy and forward traffic to the destination port at slot 2, port 12, will set the admin speed to 10 Gb/s, and will commit the transaction. 

Answer: A 


Q22. A customer is troubleshooting QoS in a Cisco UCS domain due to high packet drops in the network. The customer has configured the vNIC and associated QoS policy, and changed the MTU from 1000 to 1200. Packet drops still exist. What is the cause of this issue? 

A. The MTU specified here must be greater than the MTU specified in the associated QoS system class. If this MTU value is less than the MTU value in the QoS system class, packets may be dropped during data transmission. 

B. The MTU specified here must be equal to or less than the MTU specified in the associated QoS system class. If this MTU value exceeds the MTU value in the QoS system class, packets may be dropped during data transmission. 

C. The MTU specified here must be less than the MTU specified in the associated QoS system policy. If this MTU value exceeds the MTU value in the QoS system policy, packets may be not be dropped during data transmission. 

D. The MTU must be optimized and should be changed to fc with the CLI command set mtu fc. 

Answer: B 


Q23. Which three methods can be used to upgrade the Cisco IMC? (Choose three.) 

A. host firmware package 

B. blade firmware package 

C. controller firmware package 

D. management firmware package 

E. directly on the blade, under the Installed Firmware tab 

F. directly on the blade, under the Blade Firmware tab 

G. directly on the blade, under Inventory > CIMC 

Answer: DEG 


Q24. Which two Cisco Nexus 2000-Series Fabric Extenders support connections to both Cisco Nexus 5000 Series Switches and Cisco Nexus 7000 Series Switches? (Choose two.) 

A. Cisco Nexus 2248TP 

B. Cisco Nexus 2248TP-E 

C. Cisco Nexus 2232PP 

D. Cisco Nexus 2232TM 

Answer: AC 


Q25. How long are the LED states saved after a blade is removed from a Cisco UCS chassis? 

A. 1 minute 

B. 5 minutes 

C. 10 minutes 

D. 30 minutes 

E. 60 minutes 

Answer: C 


642-035  exam answers

Refresh cbt nuggets cisco ccnp data center 642-035 dcuct:

Q26. A customer calls in a trouble ticket and explains that after a power failure, the UPS was discovered to be defective and the Cisco UCS C210 M2 server running Windows 2008 R2 went down without proper shutdown. After restarting the server, you discover the RAID 5 array rebuilding parity. Which write-cache settings on the LSI MegaRAID 9260-4i controller explain this symptom? 

A. write back 

B. write through 

C. write back with BBU 

D. no write cache 

E. no hot spare 

Answer: A 


Q27. Which command sequence in the Cisco UCS C-Series rack server CLI sends tech support data to a TFTP server? 

A. ucs-c250 / # scope cimc ucs-c250 /cimc # scope tech-support ucs-c250 /cimc/tech-support # set path default.tar.gz ucs-c250 /cimc/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /cimc/tech-support *# commit 

B. ucs-c250 / # scope system ucs-c250 /system # scope tech-support ucs-c250 /system/tech-support # set path default.tar.gz ucs-c250 /system/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /system/tech-support *# commit 

C. ucs-c250 / # scope support ucs-c250 /support # scope tech-support ucs-c250 /support/tech-support # set path default.tar.gz ucs-c250 /support/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /support/tech-support *# commit 

D. ucs-c250 / # scope fault ucs-c250 /fault # scope tech-support ucs-c250 /fault/tech-support # set path default.tar.gz ucs-c250 /fault/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /fault/tech-support *# commit 

Answer: A 


Q28. What is the correct sequence to export tech support data from the Cisco IMC GUI interface? 

A. Admin tab > Utilities > Export Technical Support to TFTP 

B. Utilities tab > Utilities > Export Technical Support to TFTP 

C. Server tab > Utilities > Export Technical Support to TFTP 

D. Communications tab > Utilities > Export Technical Support to TFTP 

E. Support tab > Utilities > Export Technical Support to TFTP 

F. Help tab > Utilities > Export Technical Support to TFTP 

Answer: A 


Q29. The Cisco UCS Manager displays FSM information for which four of these? (Choose four.) 

A. which FSM task is being executed 

B. the current state of an FSM task 

C. the status of the previous FSM task 

D. any error codes returned while processing E. all completed FSM tasks 

F. multiple FSM tasks that completed over multiple tries 

G. multiple FSM tasks that failed 

Answer: ABCD 


Q30. For a KVM session to be successful, which two of these need to be done? (Choose two.) 

A. The Cisco IMC IP address needs to be assigned on the Admin tab. 

B. The Cisco IMC IP address needs to be in the same subnet as the management IP. 

C. The Cisco IMC needs to be upgraded to the same version as the UCS Manager. 

D. The server needs to be fully discovered. 

Answer: AD 



see more Troubleshooting Cisco Data Center Unified Computing