[Refresh] cbt nuggets 70-410

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 70-410 Exam Dumps (PDF & VCE):
Available on: https://www.certleader.com/70-410-dumps.html


Exam Code: 70-410 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: Installing and Configuring Windows Server 2012
Certification Provider: Microsoft
Free Today! Guaranteed Training- Pass 70-410 Exam.

2016 Jun 70-410 Study Guide Questions:

Q211. - (Topic 2) 

Your network contains an Active Directory domain named contoso.com. The domain 

contains a server named Server1 that runs Windows Server 2012 R2 and a server named Server2 that runs Windows Server 2008 R2 Service Pack 1 (SP1).Both servers are member servers. 

On Server2, you install all of the software required to ensure that Server2 can be managed remotely from Server Manager. 

You need to ensure that you can manage Server2 from Server1 by using Server Manager. 

Which two tasks should you perform on Server2? (Each correct answer presents part of the solution.Choose two.) 

A. Run the systempropertiesremote. execommand. 

B. Run the Fnable-PsRemoting cmdlet. 

C. Run the Enable-PsSessionConfigurationcmdlet. 

D. Run the Confiqure-SMRemoting.ps1script. 

E. Run the Set-ExecutionPolicycmdlet. 

Answer: D,E 

Explanation: 

The output of this command indicates whether Server Manager Remoting is enabled or disabled on the server. To configure Server Manager remote management by using Windows PowerShell On the computer that you want to manage remotely, open a Windows PowerShell session with elevated user rights.To do this, click Start, click All Programs, click Accessories, click Windows PowerShell, right-click the Windows PowerShell shortcut, and then click Run as administrator. In the Windows PowerShell session, type the following, and then press Enter. Set-ExecutionPolicy -ExecutionPolicyRemoteSigned Type the following, and then press Enter to enable all required firewall rule exceptions. Configure-SMRemoting.ps1 -force –enable. 


Q212. - (Topic 3) 

You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed, and all workstations have Windows 8 installed. 

You are running a training exercise for junior administrators. You are currently discussing a Windows PowerShell cmdlet that activates previously de-activated firewall rules. 

Which of the following is the cmdlet being discussed? 

A. Set-NetFirewallRule 

B. Enable-NetFirewallRule 

C. Set-NetIPsecRule 

D. Enable-NetIPsecRule 

Answer: B 

Explanation: 

Enable-NetFirewallRule – Enables a previously disabled firewall rule. 


Q213. - (Topic 2) 

You have a server named dc2.contoso.com that runs Windows Server 2012 R2 and has the DNS Server server role installed. 

You open DNS Manager as shown in the exhibit. (Click the Exhibit button.) 


You need to view the DNS server cache from DNS Manager. 

What should you do first? 

A. From the View menu, click Filter... 

B. From the Action menu, click Configure a DNS Server... 

C. From the Action menu, click Properties. 

D. From the View menu, click Advanced. 

Answer: D 

Explanation: 

To view the contents of the DNS cache, perform the following steps: 

1. Start the Microsoft Management Console (MMC) DNS snap-in (Go to Start, Programs, Administrative Tools, and click DNS). 

2. From the View menu, select Advanced. 

3. Select the Cached Lookups tree node from the left-hand pane to display the top-level domains (e.g., com, net) under.(root). Expand any of these domains to view the cached DNS information (the actual records will appear in the right-hand pane). 

Navigating the DNS Manager console you should go to the View menu and click the Advanced tab. That will yield the DNS server cache. 

: http://technet.microsoft.com/en-us/library/ee683892%28v=WS.10%29.aspx 


Q214. - (Topic 3) 

Your network contains three servers that run Windows Server 2012 R2. The servers are configured as shown in the following table. Server3 is configured to obtain an IP address automatically. 

You need to ensure that Server3 only receives an IP address from Server1. The IP address must always be the same. 

Which two tasks should you perform? (Each correct answer presents part of the solution. 

Choose two.) 


A. Create an exclusion on Server1. 

B. Create a filter on Server1. 

C. Create a reservation on Server2 

D. Create a reservation on Server1 

E. Create a filter on Server2. 

Answer: D,E 


Q215. HOTSPOT - (Topic 2) 

Your network contains an Active Directory domain named contoso.com. The network contains a DHCP server named DHCP1. 

You add a new network segment to the network. 

On the new network segment, you deploy a new server named Server1 that runs Windows 

Server 2012 R2. 

You need to configure Server1 as a DHCP Relay Agent. 

Which server role should you install on Server1? 

To answer, select the appropriate role in the answer area. 


Answer: 



70-410 exam price

Improve powershell cheat sheet 70-410 pdf:

Q216. - (Topic 3) 

You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the 

Hyper-V server role installed. On Server1, you create a virtual machine named VM1. 

You need to ensure that VM1 can start by using PXE. 

What should you do? 

A. Add a second network adapter, and then run the Set-VMNetworkAdaptercmdlet. 

B. Add a second network adapter, and then configure network adapter teaming. 

C. Remove the network adapter, and then run the Set-VMNetworkAdaptercmdlet. 

D. Remove the network adapter, and then add a legacy network adapter. 

Answer: D 


Q217. HOTSPOT - (Topic 3) 

Your network contains an Active Directory domain named contoso.com. The network contains two subnets. The subnets are configured as shown in the following table: 


The network contains a member server named Server1 that runs Windows Server 2012 R2. Server1 has the DHCP Server server role installed. 

Server1 is configured to lease IP addresses to the two subnets. You add three new printers to the Warehouse subnet. The printers have static IP addresses. The IP addresses are consecutive. 

You need to create an exclusion range that contains the IP addresses of the printers. 

From which node should you configure the exclusion range? To answer, select the appropriate node in the answer area. 


Answer: 



Q218. - (Topic 3) 

You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. 

You need to configure storage for a virtual machine to meet the following requirements: . Support up to 3 TB of data on a single hard disk. 

. Allocate disk space as needed. 

. Use a portable storage format. 

What should you configure? 

A. A fixed-size VHDX 

B. A pass-through disk 

C. A fixed-size VHD 

D. A dynamically expanding VHDX 

E. A dynamically expanding VHD 

Answer: D 

Explanation: 

Support for virtual hard disk storage capacity of up to 64 TB. 

vhd max is 2TB 

Dynamically expanding virtual hard disk uses only as much physical storage space as it 

needs to store the actual data that the disk currently contains. The size of the virtual disk’s 

image file then grows as additional data is written to it. 

References: 

http://technet.microsoft.com/en-us/library/cc720381(v=ws.10).aspx 

Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Objective 3.2: 

Create and Configure virtual machine storage, Chapter 3: p. 157-158 

70-410: Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 7: 

Hyper-V virtualization, Lesson 2: Deploying and Configuring virtual machines, p. 320 


Q219. HOTSPOT - (Topic 1) 

Your network contains an Active Directory domain named contoso.com. 

Computer accounts for the marketing department are in an organizational unit (OU) named 

Departments\Marketing\Computers. User accounts for the marketing department are in an OU named Departments\Marketing\Users. Marketing users can only log on to the client computers in the 

Departments\Marketing\Computers OU. 

You need to apply an application control policy to all of the marketing users. 

Which Group Policy Object (GPO) should you configure? 

To answer, select the appropriate GPO in the answer area. 


Answer: 



Q220. - (Topic 3) 

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the Web Server (US) server role installed. 

Server1 has a web site named Web1. Web1 is configured to use digest authentication. 

You need to ensure that a user named User1 can access Web1. 

What should you do from Active Directory Users and Computers? 

A. From the properties of User1, select Store password using reversible encryption. 

B. From the properties of User1, select Use Kerberos DES encryption types for this account. 

C. From the properties of Server1, select Trust this computer for delegation to any service (Kerberos only). 

D. From the properties of Server1, assign the Allowed to Authenticate permission to User1. 

Answer: A 

Explanation: 

Challenge Handshake Authentication Protocol (CHAP) is a basic level of iSCSI security that is used to authenticate the peer of a connection and is based upon the peers sharing a secret: that secret being a password. To make sure that User1 can connect to the server, you should use Active Directory Users and Computers to store that password. 


70-410 testing engine

Realistic self training kit 70-410:

Q221. DRAG DROP - (Topic 3) 

You have a print server named Server1Server1 runs Windows Server 2008 R2. You have a file server named Server2. Server2 runs Windows Server 2012 R2. 

You need to migrate all of the printers on Server1 to Server2. 

Which actions should you perform on the servers? 

To answer, drag the appropriate action to the correct servers in the answer area. Each action may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. 


Answer: 



Q222. HOTSPOT - (Topic 3) 

You have three servers named Server1, Server2, and DC1 that run Windows Server 2012 

R2. IPv6 addresses and configurations are assigned to all of the servers by using DHCPv6. 

The IPv6 routing on Server1 is shown in the following table. 


You verify that Server2 can ping the IPv6 address of DC1. 

You need to ensure that Server1 can ping the IPv6 address of DC1. 

What command should you run on Server1? (To answer, select the appropriate options in 

the answer area.) 



Answer: 



Q223. - (Topic 1) 

Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that hosts the primary DNS zone for contoso.com. 

All client computers are configured to use DC1 as the primary DNS server. 

You need to configure DC1 to resolve any DNS requests that are not for the contoso.com zone by querying the DNS server of your Internet Service Provider (ISP). 

What should you configure? 

A. Naming Authority Pointer (NAPTR) DNS resource records (RR) 

B. Name server (NS) records 

C. A Forwarders 

D. Conditional forwarders 

Answer: C 

Explanation: 

On a network with several servers and/or client computers a server that is configured as a forwarder will manage the Domain Name System (DNS) traffic between your network and the Internet. 


Q224. HOTSPOT - (Topic 3) 

You have a server named Server1 that runs Windows Server 2012 R2. Server1 is a member of a workgroup. 

You need to ensure that only members of the Administrators group and members of a group named Group1 can log on locally to Server1. 

Which settings should you modify from the Local Security Policy? To answer, select the appropriate settings in the answer area. 


Answer: 



Q225. - (Topic 3) 

Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2 that run Windows Server 2012 R2. You log on to Server1. You need to retrieve the IP configurations of Server2. Which command should you run from Server1? 

A. winrs -r:server2 ipconfig 

B. winrm get server2 

C. dsquery *-scope base-attr ip, server2 

D. ipconfig > server2.ip 

Answer: A 



see more Installing and Configuring Windows Server 2012